REAR SEAT ASSEMBLY (for Double Cab) > DISASSEMBLY |
| 1. REMOVE REAR SEAT ASSEMBLY LH |
![]() |
Using a T50 "TORX" socket wrench, remove the 2 bolts and rear seat assembly LH.
| 2. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY LH |
![]() |
Using a T40 "TORX" socket wrench, remove the bolt.
Remove the bolt and No. 1 seat leg sub-assembly LH.
| 3. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY RH |
![]() |
Remove the bolt and No. 1 seat leg sub-assembly RH.
| 4. REMOVE OUTER REAR SEAT LOCK COVER LH |
![]() |
Remove the screw.
Detach the clip and 2 claws labeled A, and then detach the claw labeled B in the direction indicated by the arrow in the illustration and remove the outer rear seat lock cover LH.
| 5. REMOVE INNER REAR SEAT LOCK COVER LH |
![]() |
Remove the 2 screws.
Detach the 2 claws labeled A, and then detach the claw labeled B in the direction indicated by the arrow in the illustration and remove the inner rear seat lock cover LH.
| 6. REMOVE REAR SEAT CUSHION ASSEMBLY LH |
![]() |
Using a T40 "TORX" socket wrench, remove the 2 bolts and rear seat cushion assembly LH.
| 7. REMOVE REAR SEATBACK LOCK CONTROL BEZEL LH |
![]() |
Detach the 4 claws and remove the rear seatback lock control bezel LH.
| 8. REMOVE REAR SEAT CUSHION COVER WITH PAD LH |
![]() |
Disconnect the cable from the rear seat turn lock sub-assembly LH.
![]() |
Detach the hook and open the 2 fasteners, and then open the separate type rear seat cushion cover LH.
| *1 | Fastener |
![]() |
Detach each hook from the rear seat cushion frame sub-assembly LH.
![]() |
Detach the 2 hooks from the rear seat cushion frame sub-assembly LH.
![]() |
Remove the 5 hog rings and rear seat cushion cover with pad LH.
| 9. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER LH |
![]() |
Remove the 9 hog rings and separate type rear seat cushion cover LH from the separate type rear seat cushion pad LH.
| 10. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE LH |
![]() |
Cut the cable tie and disconnect the cable.
| *1 | Cable Tie |
Remove the 4 screws and No. 1 reclining adjuster release handle LH.
| 11. REMOVE REAR SEAT HINGE COVER LH |
![]() |
Remove the 2 screws and rear seat hinge cover LH.
| 12. REMOVE REAR SEAT HINGE COVER RH |
Remove the 2 screws and rear seat hinge cover RH.
| 13. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY LH |
![]() |
Remove the bolt and rear seat turn lock sub-assembly LH.
| 14. REMOVE REAR SEAT HEADREST ASSEMBLY LH |
Remove the rear seat headrest assembly LH.
| 15. REMOVE CENTER REAR SEAT HEADREST ASSEMBLY |
Remove the center rear seat headrest assembly.
| 16. REMOVE REAR SEAT HEADREST SUPPORT LH |
![]() |
Detach the 4 claws and remove the 2 rear seat headrest supports.
| 17. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY |
![]() |
Detach the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies.
| 18. REMOVE REAR SEATBACK COVER WITH PAD LH |
![]() |
Detach the 6 hooks and remove the rear seatback cover with pad LH.
| 19. REMOVE SEPARATE TYPE REAR SEATBACK COVER LH |
![]() |
Remove the 9 hog rings and separate type rear seatback cover LH from the separate type rear seatback pad LH.
| 20. REMOVE SEAT LEG SUB-ASSEMBLY LH |
![]() |
Remove the bolt and seat leg sub-assembly LH.
| 21. REMOVE NO. 1 SEAT LEG SUB-ASSEMBLY |
![]() |
Using a T45 "TORX" socket wrench, remove the bolt.
Remove the bolt and No. 1 seat leg sub-assembly.
| 22. REMOVE INNER REAR SEAT LOCK COVER RH |
![]() |
Remove the 2 screws.
Detach the 2 claws labeled A, and then detach the claw labeled B in the direction indicated by the arrow in the illustration and remove the inner rear seat lock cover RH.
| 23. REMOVE OUTER REAR SEAT LOCK COVER RH |
![]() |
Remove the screw.
Detach the clip and 2 claws labeled A, and then detach the claw labeled B in the direction indicated by the arrow in the illustration and remove the outer rear seat lock cover RH.
| 24. REMOVE REAR SEAT CUSHION ASSEMBLY RH |
![]() |
Using a T40 "TORX" socket wrench, remove the 2 bolts and rear seat cushion assembly RH.
| 25. REMOVE REAR SEATBACK LOCK CONTROL BEZEL RH |
![]() |
Detach the 4 claws and remove the rear seatback lock control bezel RH.
| 26. REMOVE REAR SEAT CUSHION COVER WITH PAD RH |
![]() |
Disconnect the cable from the rear seat turn lock sub-assembly RH.
![]() |
Detach the hook and open the 2 fasteners, and then open the separate type rear seat cushion cover RH.
| *1 | Fastener |
![]() |
Detach the 5 hooks from the rear seat cushion frame sub-assembly RH.
![]() |
Detach the 2 hooks and remove the 2 hog rings, and then remove the rear seat cushion cover with pad RH.
| 27. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER RH |
![]() |
Remove the 9 hog rings and separate type rear seat cushion cover RH from the separate type rear seat cushion pad RH.
| 28. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE RH |
![]() |
Cut the cable tie and disconnect the cable.
| *1 | Cable Tie |
Remove the 4 screws and No. 1 reclining adjuster release handle RH.
| 29. REMOVE REAR SEAT HINGE COVER LH |
![]() |
Remove the 2 screws and rear seat hinge cover LH.
| 30. REMOVE REAR SEAT HINGE COVER RH |
Remove the 2 screws and rear seat hinge cover RH.
| 31. REMOVE REAR SEAT TURN LOCK SUB-ASSEMBLY RH |
![]() |
Remove the bolt and rear seat turn lock sub-assembly RH.
| 32. REMOVE REAR SEAT HEADREST ASSEMBLY RH |
Remove the rear seat headrest assembly RH.
| 33. REMOVE REAR SEAT HEADREST SUPPORT RH |
![]() |
Detach the 4 claws and remove the 2 rear seat headrest supports.
| 34. REMOVE REAR SEATBACK COVER WITH PAD RH |
![]() |
Detach the 4 hooks and remove the rear seatback cover with pad RH.
| 35. REMOVE SEPARATE TYPE REAR SEATBACK COVER RH |
![]() |
Remove the 9 hog rings and separate type rear seatback cover RH from the separate type rear seatback pad RH.