Home › BODY › SEAT › SEAT MEMORY SWITCH (w/ Seat Position Memory System)

SEAT MEMORY SWITCH (w/ Seat Position Memory System) > INSPECTION

for Preparation Click here



1. INSPECT SEAT MEMORY SWITCH


    B356581E01
  1. Check the resistance of the seat memory switch.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Switch Condition
      Specified Condition
      2 (M1) - 4 (E)
      Switch 1 pressed
      Below 1 Ω
      3 (M2) - 4 (E)
      Switch 2 pressed
      1 (MRY) - 4 (E)
      SET switch pressed

      If the result is not as specified, replace the seat memory switch.
      Text in Illustration 
      *a
      Component without wire harness connected
      (Seat Memory Switch)