Home › BODY › SEAT › FRONT SEATBACK HEATER (for Power Seat)

FRONT SEATBACK HEATER (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH


    B356067E01
  1. Check the resistance of the front seatback heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Seatback heater temperature 23°C (73°F)
      4.16 to 5.08 Ω

      If the result is not as specified, replace the front seatback heater assembly LH.
      Text in Illustration 
      *a
      Component without wire harness connected
      (Front Seatback Heater Assembly LH)



2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH


    B356067E01
  1. Check the resistance of the front seatback heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      1 - 2
      Seatback heater temperature 23°C (73°F)
      4.16 to 5.08 Ω

      If the result is not as specified, replace the front seatback heater assembly RH.
      Text in Illustration 
      *a
      Component without wire harness connected
      (Front Seatback Heater Assembly RH)