Home › BODY › SEAT › FRONT SEAT CUSHION HEATER (for Power Seat)

FRONT SEAT CUSHION HEATER (for Power Seat) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY LH


    B356068
  1. Check the resistance of the front seat cushion heater assembly LH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      3 - 5
      Seat cushion heater temperature 23°C (73°F)
      2.89 to 3.53 Ω

      If the result is not as specified, replace the front seat cushion heater assembly LH.
      Text in Illustration 
      *a
      Component without wire harness connected
      (Front Seat Cushion Heater Assembly LH)



2. INSPECT FRONT SEAT CUSHION HEATER ASSEMBLY RH


    B356068
  1. Check the resistance of the front seat cushion heater assembly RH.

    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance:
      Tester Connection
      Condition
      Specified Condition
      3 - 5
      Seat cushion heater temperature 23°C (73°F)
      2.89 to 3.53 Ω

      If the result is not as specified, replace the front seat cushion heater assembly RH.
      Text in Illustration 
      *a
      Component without wire harness connected
      (Front Seat Cushion Heater Assembly RH)