Home › BODY › MIRROR › POWER MIRROR CONTROL SYSTEM (w/ Memory)

POWER MIRROR CONTROL SYSTEM (w/ Memory) > SYSTEM DESCRIPTION

for Preparation Click here



POWER MIRROR CONTROL SYSTEM DESCRIPTION
  1. This system has the following functions: automatic glare-resistant electrochromic (EC) mirror, electrical remote control type mirror, memory function, and windshield deicer-linked mirror heater.


FUNCTION OF MAIN COMPONENT

Components
Function
Vertical mirror motor
Receives signal from mirror control ECU and adjusts remote control mirror vertically
Horizontal mirror motor
Receives signal from mirror control ECU and adjusts remote control mirror horizontally
Mirror retract motor
Receives signal from mirror control ECU, and retracts and returns remote control mirror
Mirror heater
Receives signal from A/C amplifier and starts mirror heater
Mirror retract switch
Retracts and returns remote control mirror. Mirror retract and return signals are sent to mirror control ECU from main body ECU.
Mirror master switch
Consists of R and L switches. One must be chosen before mirror control switches can be operated.
Outer mirror control ECU
Sends operation signal to each motor
Mirror control switch
Mirror R and L signals are sent to outer mirror control ECU from outer mirror switch.
After selecting R or L switch, RIGHT, LEFT, UP and DOWN control switches change angle of mirror.
Mirror position sensor
Detects remote control mirror position. This data is detected by mirror control ECU.
Seat memory switch (SET, M1, M2, switch)
When SET switch and M1 or M2 switch are pressed simultaneously, signal is input to outer mirror control ECU and front power seat control ECU, which records mirror position.

SYSTEM OPERATION

The remote control mirror has the following features: 
Function
Outline
Manual electrical retractable mirror
Retracts and returns remote control mirrors when mirror retract switch is pressed
Electrical remote control type mirror
When mirror control switch is operated, this function moves mirror surface vertically or horizontally to enable driver to attain optimal mirror angle. Selecting mirror master switch to R position operates right mirror, and setting it to L position operates left mirror.
Windshield deicer-linked mirror heater
Automatically turns on mirror heater when windshield deicer switch is turned on. Windshield deicer and mirror heater automatically turn off after 15 minutes.
Memory function
Stores adjusted mirror position in outer mirror control ECU