Home › BODY ELECTRICAL › LIGHTING › IGNITION KEY CYLINDER LIGHT

IGNITION KEY CYLINDER LIGHT > INSPECTION

for Preparation Click here



1. INSPECT TRANSPONDER KEY AMPLIFIER (IGNITION KEY CYLINDER LIGHT)


E145066E07
  1. Apply battery voltage to the connector and check the light illumination condition.

    OK:
    Condition
    Specified Condition
    Battery positive (+) → Terminal 2 (ILL+)
    Battery negative (-) → Terminal 6 (ILL-)
    Illuminates

    If the result is not as specified, replace the transponder key amplifier (ignition key cylinder light).
    Text in Illustration 
    *a
    Component without harness connected
    (Transponder Key Amplifier (Ignition Key Cylinder Light))