Home › BODY ELECTRICAL › DOOR LOCK › KEY REMINDER WARNING SYSTEM

KEY REMINDER WARNING SYSTEM > TERMINALS OF ECU

for Preparation Click here



CHECK MAIN BODY ECU

E146648E04

  1. Disconnect the J1, J4, DA, DB and DD ECU connectors.

  2. Measure the resistance and voltage according to the value(s) in the table below.


Terminal No. (Symbols)
Wiring Color
Terminal Description
Condition
Specified Condition
DD-62 (GND1) - Body ground
W-B - Body ground
Ground
Always
Below 1 Ω
DD-62 (GND2) - Body ground
DB-13 (BECU) - Body ground
GR - Body ground
Power source
Always
11 to 14 V
DA-1 (ALTB) - Body ground
B - Body ground
J4-24 (DCTY) - Body ground
BR - Body ground
Front door courtesy switch LH signal
Switch pushed (Door closed)
10 kΩ or higher
Switch Not pushed (Door open)
Below 1 Ω
J1-5 (KSW) - Body ground
LG - Body ground
Key unlock warning switch signal
No key is in ignition key cylinder
10 kΩ or higher
Key is in ignition key cylinder
Below 1 Ω

HINT:
lf the result is not as specified, the ECU may have a malfunction.