Home › ENGINE ยท 1GR-FE › ENGINE MECHANICAL › ENGINE UNIT

ENGINE UNIT > REMOVAL

for Preparation Click here



1. REMOVE ENGINE WIRE


2. REMOVE NO. 1 WATER BY-PASS PIPE


    A238281
  1. Disconnect the 2 water by-pass pipe hoses and remove the pipe.



3. REMOVE HEATER WATER PIPE SUB-ASSEMBLY


    A238282
  1. Disconnect the hose and remove the 2 bolts and heater water pipe.



4. REMOVE EMISSION CONTROL VALVE SET


    A225367
  1. Remove the 3 nuts and emission control valve set.



5. REMOVE NO. 2 EMISSION CONTROL VALVE SET


    A225368
  1. Remove the 3 nuts and No. 2 emission control valve set.



6. REMOVE WIRING HARNESS CLAMP BRACKET


    A239155E01
  1. Remove the 7 bolts and 7 wiring harness clamp brackets.
    Text in Illustration 
    *A
    for Bank 2
    *B
    for Bank 1



7. REMOVE IGNITION COIL ASSEMBLY


    A224724
  1. Remove the 6 bolts and 6 ignition coils.



8. REMOVE FUEL PIPE SUB-ASSEMBLY


    A238284
  1. Disconnect the 2 fuel pipes (Click here).

  1. Remove the 2 bolts and No. 1 fuel pipe and No. 2 fuel pipe.



9. REMOVE FUEL DELIVERY PIPE SUB-ASSEMBLY


    A239744
  1. Disconnect the 6 fuel injector connectors.

  1. Remove the 4 bolts and fuel delivery pipe together with the 6 fuel injectors.

    NOTICE:
    Be careful not to drop the injectors when removing the fuel delivery pipe.



10. REMOVE FUEL INJECTOR ASSEMBLY


    A223038E01
  1. Remove the 6 fuel injectors from the fuel delivery pipe.
    Text in Illustration 
    *1
    Fuel Delivery Pipe
    *2
    Fuel Injector

  1. Remove the O-ring and injector vibration insulator from each fuel injector.



11. REMOVE INTAKE MANIFOLD


    A221466
  1. Remove the 4 nuts, 6 bolts and 2 gaskets.



12. REMOVE WATER BY-PASS PIPE SUB-ASSEMBLY


    A223013
  1. Disconnect the 2 hoses.

  1. Remove the 3 bolts and water by-pass pipe.



13. REMOVE NO. 1 IDLER PULLEY SUB-ASSEMBLY


    A158544
  1. Remove the bolt and No. 1 idler pulley.



14. REMOVE NO. 2 IDLER PULLEY SUB-ASSEMBLY


A223006E03
  1. for Separate Type:
    Remove the 2 bolts, 2 idler pulley cover plates, 2 No. 2 idler pulleys and 2 No. 2 idler pulley cover plates.
    Text in Illustration 
    *A
    LH
    *B
    RH

  1. for Integrated Type:
    Remove the 2 bolts and 2 No. 2 idler pulleys.



15. REMOVE V-RIBBED BELT TENSIONER ASSEMBLY


    A222180
  1. Remove the 5 bolts and V-ribbed belt tensioner.



16. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE


    A243467
  1. Remove the dipstick.

  1. Remove the bolt and dipstick guide.

  1. Remove the O-ring from the dipstick guide.



17. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET LH


    A221156
  1. Remove the 3 bolts and front No. 1 engine mounting bracket LH.



18. REMOVE FRONT NO. 1 ENGINE MOUNTING BRACKET RH


    A221155
  1. Remove the 4 bolts and front No. 1 engine mounting bracket RH.