Home › BODY ELECTRICAL › METER › METER / GAUGE SYSTEM

METER / GAUGE SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



E282494E01


E282495E01


Communication table:  
Sender
Receiver
Communication Signal
Communication Line
ECM
Combination meter
  1. TOW HAUL indicator light signal
  2. Cruise control indicator light signal*4
  3. SET indicator light signal*4
  4. Engine coolant temperature signal
  5. A/T OIL TEMP warning light signal
  6. Current gear position signal
  7. Fuel injection information signal
  8. Engine RPM data
CAN
Center airbag sensor
Combination meter
Passenger side seat belt buckle switch signal
CAN
4WD control ECU*1
Combination meter
  1. SRS warning light signal
  2. 4HI indicator light signal
  3. 4LO indicator light signal
CAN
Skid control ECU
Combination meter
  1. ABS warning light signal
  2. AUTO LSD indicator light signal
  3. SLIP indicator light signal
  4. VSC OFF indicator light signal
  5. Vehicle speed signal
  6. Brake warning light signal
CAN
Air conditioning amplifier
Combination meter
Outside temperature signal
CAN
Main body ECU
Combination meter
  1. Driver side seat belt buckle switch signal
  2. Courtesy light switch signal
  3. Key unlock warning signal
  4. BEAM indicator light signal
  5. HEAD indicator light signal*2
  6. TAIL indicator light signal*3
  7. Light reminder signal
  8. Sliding roof open warning signal*7
CAN
Blind spot monitor sensor RH*5
Combination meter
Blind spot monitor system warning signal
CAN
Navigation receiver*6
Combination meter
Turn by turn navigation display signal
CAN
  1. *1: for 4WD
  2. *2: for U.S.A.
  3. *3: except U.S.A.
  4. *4: w/ Cruise Control System
  5. *5: w/ Blind Spot Monitor System
  6. *6: w/ Navigation System
  7. *7: w/ Sliding Roof System