THEFT DETERRENT SYSTEM > CUSTOMIZE PARAMETERS |
| CUSTOMIZING FUNCTION WITH TECHSTREAM |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Customize Setting.
Select the setting by referring to the table below.
| Display | Default | Contents | Setting |
| Warning by Horn | ON | Function that allows vehicle horns and theft deterrent horn to be used as warning device. | ON or OFF |
| Passive Mode (Security system) | OFF | Function that switches theft deterrent system from arming preparation state to armed state 30 seconds after key is not inside vehicle and driver side door is closed. In passive arming mode, theft deterrent system will judge that theft is taking place and switch to alarm sounding state if one of following operations is not performed within 14 seconds (see entry delay below) after door is opened:
| ON or OFF |
| Entry Delay | 14 s | Function that changes entry delay time (time before warning starts) for PASSIVE ARMING MODE | 0 s / 14 s / 30 s |
| Warning by Glass Broken Sensor* | ON | Function that turns glass breakage sensor ON/OFF. This function is only effective for vehicles with glass breakage sensor. | ON or OFF |