DOOR CONTROL SWITCH (for Front LH) > REMOVAL |
| 1. REMOVE FRONT ARMREST UPPER BASE PANEL LH |
![]() |
Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front armrest upper base panel LH.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
![]() |
Disconnect the connector.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
| 2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) |
![]() |
Remove the 3 screws and power window regulator master switch assembly (door control switch assembly).
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |