DOOR CONTROL SWITCH (for Front RH) > REMOVAL |
| 1. REMOVE FRONT ARMREST UPPER BASE PANEL RH |
![]() |
Using a moulding remover, detach the 2 clips and 5 claws, and remove the front armrest upper base panel RH.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
![]() |
Disconnect each connector.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
| 2. REMOVE DOOR CONTROL SWITCH ASSEMBLY |
![]() |
Detach the 2 claws and remove the door control switch assembly.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |