Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for Regular Cab)

DOOR CONTROL RECEIVER (for Regular Cab) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


B164741E01
  1. Install the door control receiver with the bolt.

  1. Connect the connector.



2. INSTALL FRONT QUARTER TRIM PANEL ASSEMBLY RH
  1. Install the front quarter trim panel assembly .

    HINT:
    The procedures listed below are for the LH side.



3. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH
  1. Attach the 9 clips to install the lower quarter trim panel assembly RH.

  1. Install the jack assembly.

  1. Install the trim cover.



    B167430
  1. Twist the front seat outer belt assembly RH counterclockwise and connect it with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

  1. Attach the 2 claws to install the cover.



4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
  1. Install the front door opening trim weatherstrip .

    HINT:
    The procedures listed below are for the LH side.



5. INSTALL COWL SIDE TRIM BOARD RH
  1. Install the cowl side trim board .

    HINT:
    The procedures listed below are for the LH side.



6. INSTALL FRONT DOOR SCUFF PLATE RH
  1. Install the front door scuff plate .

    HINT:
    The procedures listed below are for the LH side.



7. INSTALL LUGGAGE COMPARTMENT BOX RH
  1. Install the luggage compartment box RH with the 4 clips.



8. INSTALL LUGGAGE COMPARTMENT BOX LH
  1. Attach the 3 claws to install the luggage compartment box LH.

  1. Install the 2 clips.



9. INSTALL UPPER BACK PANEL GARNISH
  1. Attach the 10 clips to install the upper back panel garnish.