UNLOCK WARNING SWITCH > REMOVAL |
| 1. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt) |
![]() |
Remove the 2 screws.
Detach the 2 claws to remove the lower steering column cover.
| 2. REMOVE UPPER STEERING COLUMN COVER (for Manual Tilt) |
![]() |
Detach the 4 clips.
Detach the claw to remove the upper steering column cover.
| 3. REMOVE LOWER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column) |
![]() |
Remove the 2 screws.
Detach the 2 claws to remove the lower steering column cover.
| 4. REMOVE UPPER STEERING COLUMN COVER (for Manual Tilt and Manual Telescopic Steering Column) |
Detach the 4 clips.
![]() |
Detach the claw to remove the upper steering column cover.
| 5. REMOVE LOWER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) |
![]() |
Remove the 2 screws.
Detach the 2 claws to remove the lower steering column cover.
| 6. REMOVE UPPER STEERING COLUMN COVER (for Power Tilt and Power Telescopic Steering Column) |
![]() |
Detach the 4 clips.
Detach the claw to remove the upper steering column cover.
| 7. REMOVE UNLOCK WARNING SWITCH ASSEMBLY |
![]() |
Disconnect the connector.
Insert the key.
Remove the unlock warning switch assembly by releasing the 2 claws.
![]() | Slide |