CENTER POWER OUTLET SOCKET (for Floor Shift Type) > INSTALLATION |
| 1. INSTALL POWER OUTLET SOCKET COVER (for Double Cab) |
![]() |
Attach the 2 claws to install the power outlet socket cover.
| 2. INSTALL POWER OUTLET SOCKET ASSEMBLY (for Double Cab) |
![]() |
Attach the claw to install the power outlet socket assembly.
| 3. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY (for Double Cab) |
w/ Power Outlet Socket:
Attach the 2 wire harness clamps and connect the connector.
![]() |
Attach the 7 clips to install the rear console end panel sub-assembly.
| 4. INSTALL POWER OUTLET SOCKET COVER |
![]() |
Attach the 2 claws to install the power outlet socket cover.
| 5. INSTALL POWER OUTLET SOCKET ASSEMBLY |
![]() |
Attach the claw to install the power outlet socket assembly.
| 6. INSTALL CONSOLE BOX BEZEL |
![]() |
Attach the 5 claws to install the console box bezel.
Connect the connector.
| 7. INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY |
Attach the 12 clips to install the upper console panel sub-assembly.
| 8. INSTALL UPPER REAR CONSOLE PANEL SUB-ASSEMBLY |
![]() |
Attach the 6 clips to install the upper rear console panel sub-assembly.