Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH (for Front LH)

DOOR CONTROL SWITCH (for Front LH) > INSPECTION

for Preparation Click here



1. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) (for Regular Cab)


    B165987E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    1 (L) - 7 (E)
    Lock
    Below 1 Ω
    1 (L) - 7 (E)
    OFF
    10 kΩ or higher
    9 (UL) - 7 (E)
    9 (UL) - 7 (E)
    Unlock
    Below 1 Ω

    If the result is not as specified, replace the power window regulator master switch assembly (door control switch assembly).
    Text in Illustration 
    *a
    Component without harness connected
    (Power Window Regulator Master Switch Assembly (Door Control Switch Assembly))
    *b
    Unlock
    *c
    Lock



2. INSPECT POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (DOOR CONTROL SWITCH ASSEMBLY) (for Double Cab, for Crew Max)


    B162224E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    2 (L) - 1 (E)
    Lock
    Below 1 Ω
    2 (L) - 1 (E)
    OFF
    10 kΩ or higher
    9 (UL) - 1 (E)
    9 (UL) - 1 (E)
    Unlock
    Below 1 Ω

    If the result is not as specified, replace the power window regulator master switch assembly (door control switch assembly).
    Text in Illustration 
    *a
    Component without harness connected
    (Power Window Regulator Master Switch Assembly (Door Control Switch Assembly))
    *b
    Unlock
    *c
    Lock