Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL SWITCH (for Front RH)

DOOR CONTROL SWITCH (for Front RH) > INSPECTION

for Preparation Click here



1. INSPECT DOOR CONTROL SWITCH ASSEMBLY


B164735E04
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Switch Condition
    Specified Condition
    4 (L) - 3 (E)
    Lock
    Below 1 Ω
    4 (L) - 3 (E)
    OFF
    10 kΩ or higher
    2 (UL) - 3 (E)
    2 (UL) - 3 (E)
    Unlock
    Below 1 Ω

    If the result is not as specified, replace the door control switch assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (Door Control Switch Assembly)
    *b
    Unlock
    *c
    Lock