Home › BODY › EXTERIOR › FENDER LINER (for Front Side)

FENDER LINER (for Front Side) > REMOVAL

for Preparation Click here



1. REMOVE SIDE STEP ASSEMBLY LH (w/ Side Step)


  1. Remove the 8 bolts and side step.


    B169240E05



2. REMOVE SIDE STEP ASSEMBLY RH (w/ Side Step)

HINT:
Use the same procedure described for the LH side.



3. REMOVE FRONT FENDER MUDGUARD LH (w/ Mudguard)


B355062
  1. Remove the clip.

  1. Remove the 3 screws and front fender mudguard LH.



4. REMOVE FRONT FENDER MUDGUARD RH (w/ Mudguard)

HINT:
Use the same procedure described for the LH side.



5. REMOVE FRONT FENDER LINER LH


    B355060
  1. Remove the 4 screws and clip.



    B355030
  1. Remove the 13 grommets and front fender liner LH.



6. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH


    B355032
  1. for Resin Type Bumper:

    1. Remove the clip.

    2. Remove the 5 screws and front wheel opening extension pad LH.



    B355033E01
  1. for Steel Type Bumper:

    1. Using a screwdriver, remove the 2 pin hold clips.

    2. Remove the clip.

    3. Remove the 3 screws and front wheel opening extension pad LH.



7. REMOVE FRONT FENDER LINER RH


    B355061
  1. Remove the 4 screws and clip.



    B355031
  1. Remove the 13 grommets and front fender liner RH.



8. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH


    B355034
  1. for Resin Type Bumper:

    1. Remove the clip.

    2. Remove the 5 screws and front wheel opening extension pad RH.



    B355035E01
  1. for Steel Type Bumper:

    1. Using a screwdriver, remove the 2 pin hold clips.

    2. Remove the clip.

    3. Remove the 3 screws and front wheel opening extension pad RH.