FRONT DOOR SPEAKER (for Regular Cab) > INSTALLATION |
| 1. INSTALL FRONT NO. 1 SPEAKER ASSEMBLY |
![]() |
Connect the connector.
Install the front No. 1 speaker assembly with the 4 screws.
| 2. INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
![]() |
Connect the 2 cables to the inside handle.
Attach the inside handle's knob to the door trim board.
Attach the 10 clips to install the door trim board.
![]() |
Install the inside handle and door trim board to the door trim panel with the screw.
Install the door trim board to the door panel with the screw.
Attach the clip.
| 3. INSTALL FRONT DOOR ARMREST COVER LH |
| 4. INSTALL FRONT DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window) |
![]() |
Install the plate and regulator handle with the snap ring.
| 5. INSTALL FRONT UPPER ARMREST BASE PANEL LH (w/ Power Window) |
Connect the master switch connector.
![]() |
Attach the 2 clips and 5 claws to install the front upper armrest base panel LH.
| 6. INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG LH |
![]() |
Attach the 4 claws to install the bezel plug.
| 7. INSTALL FRONT LOWER DOOR FRAME BRACKET GARNISH LH |
![]() |
Attach the 3 clips to install the front lower door frame bracket garnish.