REAR DOOR SPEAKER (for Double Cab) > INSPECTION |
| 1. INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for Standard) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 3.2 to 4.8 Ω |
| *a | Component without harness connected (Rear No. 1 Speaker Assembly) |
| 2. INSPECT REAR NO. 1 SPEAKER ASSEMBLY (for 7 Speakers) |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | Always | 2 Ω |
| *a | Component without harness connected (Rear No. 1 Speaker Assembly) |