Home › BODY ELECTRICAL › AUDIO / VISUAL › RADIO RECEIVER (for Column Shift Type)

RADIO RECEIVER (for Column Shift Type) > INSTALLATION

for Preparation Click here



1. INSTALL STEREO COMPONENT TUNER ASSEMBLY (w/ Satellite Radio)


    B355131
  1. Attach the 2 guides to install the stereo component tuner assembly as shown in the illustration.



2. INSTALL NO. 2 RADIO RECEIVER BRACKET
  1. w/o Satellite Radio:
    Install the No. 2 radio receiver bracket with the 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }

  1. w/ Satellite Radio:
    Install the No. 2 radio receiver bracket with the 5 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



3. INSTALL NO. 1 RADIO RECEIVER BRACKET
  1. w/o Satellite Radio:
    Install the No. 1 radio receiver bracket with the 3 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }

  1. w/ Satellite Radio:
    Install the No. 1 radio receiver bracket with the 5 bolts.

    Torque:
    3.5 N*m{ 36 kgf*cm , 31 in.*lbf }



4. INSTALL NO. 1 NAVIGATION WIRE (w/ Satellite Radio)
  1. Connect each connector to install the No. 1 navigation wire.



5. INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY
  1. Connect each connector.

  1. Insert the radio and display receiver assembly with bracket and attach the 2 guides and 3 clips on its backside.

    NOTICE:
    When inserting the radio receiver, do not press its knobs.

  1. Install the radio and display receiver assembly with bracket with the 4 bolts.

    Torque:
    5.5 N*m{ 56 kgf*cm , 49 in.*lbf }



6. INSTALL AIR CONDITIONING CONTROL ASSEMBLY


    E281401E01
  1. Attach the 3 clips to install the air conditioning control assembly to the center lower instrument panel finish panel.
    Text in Illustration 
    *1
    Air Conditioning Control Assembly
    *2
    Center Lower Instrument Panel Finish Panel



  1. Put protective tape around the air conditioning control assembly.


    E281400E01


    Text in Illustration 
    *A
    for Automatic Air Conditioning System
    *B
    for Manual Air Conditioning System
    *1
    Protective Tape
    *2
    Air Conditioning Control Assembly
    *3
    Center Lower Instrument Panel Finish Panel
    -
    -

  1. Connect each connector.

  1. Attach the 8 clips, 2 claws and guide to install the air conditioning control assembly together with the center lower instrument panel finish panel.



7. INSTALL CENTER LOWER INSTRUMENT COVER
  1. Attach the 2 guides and 2 clips to install the lower center instrument cover.

  1. Install the 2 clips.



8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (Click here).