Home › BODY ELECTRICAL › AUDIO / VISUAL › INSTRUMENT PANEL SPEAKER (for Regular Cab)

INSTRUMENT PANEL SPEAKER (for Regular Cab) > INSPECTION

for Preparation Click here



1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY
  1. When there is a malfunction such as noise from a speaker or no sound at all, replace the speaker with a new one and check that the malfunction disappears.

    OK:
    Malfunction disappears.

    HINT:
    1. Connect the connectors to the front No. 2 speaker assemblies.
    2. When there is a possibility that either the right or left front No. 2 speaker assembly is defective, inspect by interchanging the right one with the left one.
    3. Perform the inspection above on both the LH and RH sides.