INSTRUMENT PANEL SPEAKER (for Regular Cab) > INSTALLATION |
| 1. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY RH |
Connect the connector.
Temporarily install the front No. 2 speaker assembly RH by aligning the positioning pins of the front No. 2 speaker assembly RH with the instrument panel.
Install the front No. 2 speaker assembly RH with the 2 bolts.
| 2. INSTALL FRONT NO. 2 SPEAKER ASSEMBLY LH |
Connect the connector.
Temporarily install the front No. 2 speaker assembly LH by aligning the positioning pins of the front No. 2 speaker assembly LH with the instrument panel.
Install the front No. 2 speaker assembly LH with the 2 bolts.
| 3. INSTALL NO. 2 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
Attach the 2 guides, 3 clips and 3 claws to install the No. 2 instrument panel speaker panel sub-assembly.
| 4. INSTALL NO. 1 INSTRUMENT PANEL SPEAKER PANEL SUB-ASSEMBLY |
Attach the 2 guides, 3 clips and 3 claws to install the No. 1 instrument panel speaker panel sub-assembly.
| 5. INSTALL FRONT PILLAR GARNISH RH |
Attach the clip to install the front pillar garnish RH.
Install the front assist grip sub-assembly to the front pillar garnish RH with the 2 bolts.
![]() |
Attach the 2 claws to close the 2 assist grip covers.
| 6. INSTALL FRONT PILLAR GARNISH LH |
Attach the clip to install the front pillar garnish LH.
Install the bolt.
![]() |
Attach the claw to close the cover.