Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for Double Cab)

DOOR CONTROL RECEIVER (for Double Cab) > INSTALLATION

for Preparation Click here



1. INSTALL DOOR CONTROL RECEIVER


B165415E01
  1. Install the door control receiver with the bolt.

  1. Connect the connector.



2. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH
  1. Install the lower quarter trim panel assembly .

    HINT:
    The procedures listed below are for the LH side.



3. INSTALL REAR DOOR SCUFF PLATE RH
  1. Install the rear door scuff plate .

    HINT:
    The procedures listed below are for the LH side.



4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH
  1. Install the rear door opening trim weatherstrip .

    HINT:
    The procedures listed below are for the LH side.



5. INSTALL REAR SEAT ASSEMBLY


    B166544
  1. Attach the 4 hooks on the back side of the rear seat assembly and install it.

    NOTICE:
    Be careful not to damage the vehicle body.



    B165600E01
  1. Install the 6 bolts in the order indicated in the illustration.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



6. INSTALL SEAT FLOOR BOX


B165790
  1. Attach the claw to install the seat floor box.

  1. Install the 4 knobs.



7. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY RH


    B356758
  1. Attach the 2 hooks to install the luggage compartment side cover sub-assembly RH.

  1. Close the luggage compartment side cover sub-assembly RH and turn the knob.



8. INSTALL LUGGAGE COMPARTMENT SIDE COVER SUB-ASSEMBLY LH


    B356759
  1. Attach the 3 hooks to install the luggage compartment side cover sub-assembly LH.

  1. Close the luggage compartment side cover sub-assembly LH and turn the knob.



    B166545
  1. Pull the 2 seat adjusting handles and fold down the seat cushion.