Home › BODY ELECTRICAL › DOOR LOCK › DOOR CONTROL RECEIVER (for CrewMax)

DOOR CONTROL RECEIVER (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE REAR DOOR SCUFF PLATE RH
  1. Remove the rear door scuff plate .

    HINT:
    The procedures listed below are for the LH side.



2. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
  1. Remove the rear door opening trim weatherstrip .

    HINT:
    The procedures listed below are for the LH side.



3. REMOVE LOWER QUARTER TRIM PANEL ASSEMBLY RH
  1. Remove the lower quater trim panel .

    HINT:
    The procedures listed below are for the LH side.



4. REMOVE DOOR CONTROL RECEIVER


B356092
  1. Disconnect the connector.

  1. Remove the bolt and door control receiver.