Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY

PERSONAL LIGHT ASSEMBLY > DISASSEMBLY

for Preparation Click here



1. REMOVE MAP LIGHT BULB


E281377E01

HINT:
Use the same procedure for both map light bulbs.

  1. Put protective tape around the map light lens.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a screwdriver, detach the 2 claws and guide and remove the map light lens.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *2
    Tape



    E281378E01
  1. Using a screwdriver, push out the map light bulb from the back of the roof console box and remove the map light bulb.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *1
    Tape



2. REMOVE MAP LIGHT SWITCH


E281379

HINT:
Use the same procedure for both map light switches.

  1. Remove the map light switch from the roof console box.