Home › BODY ELECTRICAL › LIGHTING › PERSONAL LIGHT ASSEMBLY

PERSONAL LIGHT ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY (PERSONAL LIGHT ASSEMBLY)


E281375E01
  1. Put protective tape around the roof console box base.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a screwdriver, detach the 8 claws and remove the roof console box base.

    HINT:
    Tape the screwdriver tip before use.

    Text in Illustration 
    *2
    Tape



    E281376
  1. Using a T20 "TORX" socket wrench, remove the 4 screws.

  1. Disconnect the connector and remove the roof console box assembly (personal light assembly).