Home › DRIVE LINE › WF1AM TRANSFER › TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM

TOUCH SELECT 2-4 AND HIGH-LOW SYSTEM > SYSTEM DIAGRAM

for Preparation Click here



C290910E01


C290911E04


Transmitting ECU (Transmitter)
Receiving ECU
Signal
Communication Method
Skid control ECU
4 wheel drive control ECU
  1. Wheel speed sensor error signal
  2. Wheel speed signal
  3. Vehicle wheel sensor power supply decline status signal
  4. Vehicle speed signal
CAN communication system
ECM
4 wheel drive control ECU
  1. Shift position P signal
  2. Shift position N signal
CAN communication system
4 wheel drive control ECU
Combination meter assembly
  1. 4WD indicator ON and flashing request signal
  2. L4 indicator ON and flashing request signal
  3. Buzzer sound demand signal
CAN communication system
4 wheel drive control ECU
Skid control ECU
  1. Motor energizing signal
  2. 4WD status signal
  3. L4 status signal
CAN communication system
4 wheel drive control ECU
ECM
  1. Cruise control cancel request signal
  2. 4WD status signal
CAN communication system