AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System) > DTC CHECK / CLEAR |
| CHECK DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Air conditioner / Trouble Codes.
Check for DTCs.
| CLEAR DTC |
Connect the Techstream to the DLC3.
Turn the ignition switch ON.
Turn the Techstream on.
Enter the following menus: Body Electrical / Air conditioner / Trouble Codes.
Clear the DTCs.
| INDICATOR CHECK |
![]() |
Press and hold the A/C control AUTO switch and Recirculation / Fresh switch simultaneously, and turn the ignition switch ON. Continue holding the 2 switches until the panel diagnosis mode begins.
![]() |
Check that all indicators turn on and off 4 times in succession at 1 second intervals.