POWER WINDOW MASTER SWITCH > REMOVAL |
| 1. REMOVE FRONT UPPER ARMREST BASE PANEL LH |
![]() |
Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front upper armrest base panel LH.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
![]() |
Disconnect the master switch connector.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
| 2. REMOVE POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY |
![]() |
Remove the 3 screws and power window regulator master switch assembly.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |