POWER WINDOW REGULATOR MOTOR (for Front Door) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH |
for Regular Cab:
Remove the front door inside handle bezel plug LH .
for Double Cab:
Remove the front door inside handle bezel plug LH .
for CrewMax:
Remove the front door inside handle bezel plug LH .
| 3. REMOVE FRONT UPPER ARMREST BASE PANEL LH |
![]() |
Using a moulding remover A, detach the 2 clips and 5 claws, and remove the front upper armrest base panel LH.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
![]() |
Disconnect the master switch connector.
| *A | for Regular Cab |
| *B | for Double Cab, for CrewMax |
| 4. REMOVE FRONT LOWER DOOR FRAME BRACKET GARNISH LH |
for Regular Cab:
Remove the front lower door frame bracket garnish LH .
for Double Cab:
Remove the front lower door frame bracket garnish LH .
for CrewMax:
Remove the front lower door frame bracket garnish LH .
| 5. REMOVE FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH |
for Regular Cab:
Remove the front door trim board sub-assembly LH .
for Double Cab:
Remove the front door trim board sub-assembly LH .
for CrewMax:
Remove the front door trim board sub-assembly LH .
| 6. REMOVE FRONT NO. 1 SPEAKER ASSEMBLY |
for Regular Cab:
Remove the front No. 1 speaker assembly .
for Double Cab:
Remove the front No. 1 speaker assembly .
for CrewMax:
Remove the front No. 1 speaker assembly .
| 7. REMOVE FRONT NO. 1 DOOR TRIM BRACKET |
for Regular Cab:
Remove the front No. 1 door trim bracket .
for Double Cab:
Remove the front No. 1 door trim bracket .
for CrewMax:
Remove the front No. 1 door trim bracket .
| 8. REMOVE FRONT DOOR SERVICE HOLE COVER LH |
for Regular Cab:
Remove the front door service hole cover LH .
for Double Cab:
Remove the front door service hole cover LH .
for CrewMax:
Remove the front door service hole cover LH .
| 9. REMOVE FRONT DOOR GLASS SUB-ASSEMBLY LH |
for Regular Cab:
Remove the front door glass sub-assembly LH .
for Double Cab:
Remove the front door glass sub-assembly LH .
for CrewMax:
Remove the front door glass sub-assembly LH .
| 10. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY LH |
for Regular Cab:
Remove the front door window regulator sub-assembly LH .
for Double Cab:
Remove the front door window regulator sub-assembly LH .
for CrewMax:
Remove the front door window regulator sub-assembly LH .
| 11. REMOVE FRONT POWER WINDOW REGULATOR MOTOR ASSEMBLY LH |
Using a T25 "TORX" driver, remove the 3 screws and motor.

| *1 | SPRING | - | - |
| *a | Range of Movement | - | - |