Home › BODY › WINDSHIELD / WINDOWGLASS › REAR POWER WINDOW SWITCH

REAR POWER WINDOW SWITCH > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the LH side and RH side.
  2. The listed below is for the LH side.



1. INSTALL REAR POWER WINDOW REGULATOR SWITCH ASSEMBLY


    E278384
  1. Attach the 2 claws to install the rear power window regulator switch assembly.



2. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH


    E278383
  1. Connect the connector.



    E278385
  1. Attach the 2 clips and 5 claws to install the rear upper door armrest base panel LH.