Home › BODY › SLIDING ROOF › SLIDING ROOF SYSTEM

SLIDING ROOF SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZING FUNCTION WITH TECHSTREAM

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Be sure to make a note of the current settings before customizing.
  3. When troubleshooting a function, first make sure that the function is set to the default setting.

  1. Connect the Techstream to the DLC3.

  2. Turn the ignition switch ON.

  3. Turn the tester on.

  4. Enter the following menus:
    Select: Customize Setting.

  5. Select the setting by referring to the table below.

    Sliding Roof 
    Display (Item)
    Default
    Contents
    Setting
    Door Key Related Open
    ON
    Function to manually open sliding roof linked with power window if holding driver side door key for 3 seconds or more to unlock position when ignition switch is off
    ON / OFF
    Door Key Related Close
    ON
    Function to manually close sliding roof linked with power window if holding driver side door key for 3 seconds or more to lock position when ignition switch is off
    ON / OFF
    Door Key Related Operation
    SLIDE
    Function to select tilt up or slide open of manual sliding roof operation linked with power window activated by holding driver side door key for 3 seconds or more to unlock position when ignition switch is off
    TILT / SLIDE