Home › BODY › INTERIOR › OVERHEAD CONSOLE BOX

OVERHEAD CONSOLE BOX > REMOVAL

for Preparation Click here



1. REMOVE ROOF CONSOLE BOX ASSEMBLY


    B356939E01
  1. Apply protective tape as shown in the illustration.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a screwdriver, detach the 8 claws and remove the roof console box base.

    HINT:
    Tape the screwdriver tip before use.



    B356941
  1. Using a T20 "TORX" driver, remove the 4 "TORX" screws and remove the roof console box assembly.

  1. Disconnect the connector.