Home › ENGINE ยท 1UR-FE › EMISSION CONTROL › AIR SWITCHING VALVE (for Bank 1)

AIR SWITCHING VALVE (for Bank 1) > REMOVAL

for Preparation Click here



1. DISCONNECT NO. 2 AIR HOSE


    A307647
  1. Disconnect the air switching valve assembly connector.

  1. Slide the clamp and disconnect the No. 2 air hose.



2. REMOVE AIR SWITCHING VALVE ASSEMBLY


    A307648
  1. Remove the bolt and disconnect the wire harness clamp bracket from the cylinder head cover.



    A307649
  1. Remove the 2 bolts.



    A307650
  1. Remove the 3 bolts, air switching valve assembly and gasket.

    NOTICE:
    Be careful not to damage the installation surface of the gaskets.