PURGE VALVE > INSTALLATION |
| 1. INSTALL PURGE VSV |
![]() |
Install the purge VSV with the bolt.
Connect the connector.
| 2. CONNECT PURGE LINE HOSE |
Connect the 2 hoses.
| 3. INSTALL V-BANK COVER |
![]() |
Attach the 2 V-bank cover hooks to the No. 1 V-bank cover bracket. Then align the 2 V-bank cover grommets with the 2 pins, and press down on the V-bank cover sub-assembly to attach the pins.
| *1 | V-bank Cover Grommet |
| *2 | Pin |
| *3 | No. 1 V-bank Cover Bracket |
| *4 | V-bank Cover Hook |