Home › ENGINE ยท 3UR-FE › EMISSION CONTROL › PURGE VALVE

PURGE VALVE > REMOVAL

for Preparation Click here



1. REMOVE V-BANK COVER


    A165576E04
  1. Raise the front of the V-bank cover sub-assembly to detach the 2 pins. Then remove the 2 V-bank cover hooks from the No. 1 V-bank cover bracket, and remove the V-bank cover sub-assembly.
    Text in Illustration 
    *1
    V-bank Cover Grommet
    *2
    Pin
    *3
    No. 1 V-bank Cover Bracket
    *4
    V-bank Cover Hook



2. DISCONNECT PURGE LINE HOSE
  1. Disconnect the 2 purge line hoses.



3. REMOVE PURGE VSV


    A158599
  1. Disconnect the connector.

  1. Remove the bolt and purge VSV.