CAMSHAFT POSITION SENSOR > INSTALLATION |
| 1. INSTALL CAMSHAFT POSITION SENSOR |
![]() |
Install the sensor with the bolt.
Connect the sensor connector.
| 2. INSTALL V-BANK COVER SUB-ASSEMBLY |
![]() |
Attach the 2 V-bank cover hooks to the No. 1 V-bank cover bracket. Then align the 2 V-bank cover grommets with the 2 pins, and press down on the V-bank cover sub-assembly to attach the pins.
| *1 | V-bank Cover Grommet |
| *2 | Pin |
| *3 | No. 1 V-bank Cover Bracket |
| *4 | V-bank Cover Hook |