REAR SEAT ASSEMBLY (for CrewMax LH Side) > INSTALLATION |
| 1. INSTALL REAR OUTER SEAT LEG BRACKET SUB-ASSEMBLY RH |
Install rear outer seat leg bracket sub-assembly RH with the 2 bolts.
| 2. INSTALL REAR INNER SEAT LEG BRACKET SUB-ASSEMBLY RH |
Install rear inner seat leg bracket sub-assembly RH with the 2 bolts.
| 3. INSTALL REAR OUTER SEAT LEG BRACKET SUB-ASSEMBLY LH |
Install rear outer seat leg bracket sub-assembly LH with the 2 bolts.
| 4. INSTALL REAR INNER SEAT LEG BRACKET SUB-ASSEMBLY LH |
Install rear inner seat leg bracket sub-assembly LH with the 3 bolts.
| 5. INSTALL REAR FLOOR BOARD RH |
Install the rear floor board RH.
| 6. INSTALL NO. 2 REAR FLOOR BOARD SPACER |
Install the No. 2 rear floor board spacer.
| 7. INSTALL REAR FLOOR BOARD SPACER |
Install the rear floor board spacer.
| 8. INSTALL FRONT FLOOR CARPET ASSEMBLY |
Return the front floor carpet assembly to its original position.
Attach the 6 clamps.
Install the tool bag.
| 9. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY LH |
Attach the 5 clips to install the lower quarter trim panel assembly LH.
Connect the rear seat outer belt assembly with the bolt.
Attach the 2 claws to install the cover.
| 10. INSTALL LOWER QUARTER TRIM PANEL ASSEMBLY RH |
| 11. INSTALL REAR DOOR WEATHERSTRIP LH |
Install the rear door opening trim weatherstrip LH.
| 12. INSTALL REAR DOOR WEATHERSTRIP RH |
| 13. INSTALL REAR DOOR SCUFF PLATE LH |
Attach the 8 claws and 2 clips to install the rear door scuff plate LH.
| 14. INSTALL REAR DOOR SCUFF PLATE RH |
| 15. INSTALL NO. 1 BOX SPEAKER ASSEMBLY (w/ Woofer) |
Connect the connector.
![]() |
Install the No. 1 box speaker assembly with the 3 bolts.
| 16. CONNECT REAR SEAT OUTER BELT ASSEMBLY LH |
Connect the floor anchor of the rear seat outer belt assembly LH with the bolt.
Check that the rear seat outer belt assembly LH is not twisted.
| 17. CONNECT REAR SEAT OUTER BELT ASSEMBLY RH |
| 18. INSTALL REAR NO. 1 SEAT OUTER LAP BELT ANCHOR COVER |
Attach the 2 claws and install the rear No. 1 seat outer lap belt anchor cover.
| 19. INSTALL REAR SEAT ASSEMBLY LH |
Install the rear seat assembly LH with the 4 bolts.
![]() |
Pull the No. 1 reclining adjuster release handle LH and fold down the seat cushion.
| 20. INSTALL REAR SEAT INNER BELT ASSEMBLY |
![]() |
Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration.
| *1 | Rubber Band |
| *2 | Protruding Part |
Install the rear seat inner belt assembly with the bolt.
| 21. INSTALL REAR SEAT ASSEMBLY RH |
Install the rear seat assembly RH with the 4 bolts.
![]() |
Pull the No. 1 reclining adjuster release handle RH and fold down the seat cushion.