Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for CrewMax)

REAR SEAT INNER BELT ASSEMBLY (for CrewMax) > INSTALLATION

for Preparation Click here



1. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY LH
  1. Attach the guide.

  1. Tighten the bolt to install the rear No. 1 seat inner belt assembly LH.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B355145
  1. Pull the No. 1 reclining adjuster release handle LH and fold down the seat cushion.



2. INSTALL REAR NO. 1 SEAT INNER BELT ASSEMBLY RH
  1. Attach the guide.

  1. Tighten the bolt to install the rear No. 1 seat inner belt assembly RH.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B355146
  1. Pull the No. 1 reclining adjuster release handle RH and fold down the seat cushion.



3. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B355201E01
  1. Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration.
    Text in Illustration 
    *1
    Rubber Band
    *2
    Protruding Part

  1. Install the rear seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    1. Be careful not to damage the vehicle body.
    2. Do not allow the anchor of the rear seat inner belt assembly to overlap the protruding part.

  1. Install the rear seat assembly RH with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }



    B355146
  1. Pull the No. 1 reclining adjuster release handle RH and fold down the seat cushion.