Home › RESTRAINTS › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY (for CrewMax)

REAR SEAT INNER BELT ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY LH


    B353822
  1. Pull the No. 1 reclining adjuster release handle LH and fold up the seat cushion.



    B353853
  1. Loosen the bolt.

  1. Detach the guide and remove the rear No. 1 seat inner belt assembly LH.



2. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY RH


    B353823
  1. Pull the No. 1 reclining adjuster release handle RH and fold up the seat cushion.



    B355156
  1. Loosen the bolt.

  1. Detach the guide and remove the rear No. 1 seat inner belt assembly RH.



3. REMOVE REAR SEAT INNER BELT ASSEMBLY


    B353823
  1. Pull the No. 1 reclining adjuster release handle RH and fold up the seat cushion.



    B353825
  1. Remove the 4 bolts and rear seat assembly RH.

    NOTICE:
    Be careful not to damage the vehicle body.



    B353826E01
  1. Remove the bolt.

  1. Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration, and then remove the rear seat inner belt assembly.
    Text in Illustration 
    *1
    Rubber Band