Home › RESTRAINTS › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY (for CrewMax)

REAR CENTER SEAT OUTER BELT ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT ASSEMBLY RH


    B353823
  1. Pull the No. 1 reclining adjuster release handle RH and fold up the seat cushion.



    B353825
  1. Remove the 4 bolts and rear seat assembly RH.

    NOTICE:
    Be careful not to damage the vehicle body.



2. REMOVE REAR SEAT INNER BELT ASSEMBLY


    B353826E01
  1. Remove the bolt.

  1. Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration, and then remove the rear seat inner belt assembly.
    Text in Illustration 
    *1
    Rubber Band



3. REMOVE REAR SEAT ASSEMBLY LH


    B353822
  1. Pull the No. 1 reclining adjuster release handle LH and fold up the seat cushion.



    B353824
  1. Remove the 4 bolts and rear seat assembly LH.

    NOTICE:
    Be careful not to damage the vehicle body.



4. REMOVE REAR SEAT HEADREST ASSEMBLY


    B353848
  1. Push the 2 lock release buttons indicated by the arrows in the illustration to release the lock, and then remove the rear seat headrest assembly.



5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


    B353849
  1. Push the lock release button indicated by the arrows in the illustration to release the lock, and then remove the rear center seat headrest assembly.



6. REMOVE REAR SEATBACK LOCK CONTROL BEZEL


  1. Pull out the 2 fasteners.


    B353839



    B353841
  1. Detach the 2 hooks and open the 2 fasteners, and then open the separate type rear seat cushion cover.



  1. Detach the 4 claws on the backside of the rear seatback lock control bezel and remove the rear seatback lock control bezel.


    B353843



7. REMOVE SEPARATE TYPE REAR SEAT CUSHION COVER WITH PAD


  1. Detach the 6 hooks and remove the separate type rear seat cushion cover with pad.


    B353845



8. REMOVE REAR SEAT RECLINING COVER LH


  1. Using a T25 "TORX" socket wrench, remove the 2 screws.


    B353850

  1. Detach the guide and claw, and then remove the rear seat reclining cover LH.



9. REMOVE REAR SEAT INNER RECLINING COVER LH


B353851
  1. Using a T25 "TORX" socket wrench, remove the screw.

  1. Detach the clip.

  1. Detach the 2 guides in the direction indicated by the arrow shown in the illustration, and then remove the rear seat inner reclining cover LH.



10. REMOVE REAR SEAT ARMREST ASSEMBLY


    B353854
  1. Remove the 3 nuts and rear seat center armrest assembly from the rear seatback.



    B353855
  1. Using a T25 "TORX" socket wrench, remove the 2 bolts together with the 2 bushes.

  1. Remove the rear seat armrest bracket from the rear seat center armrest assembly.



11. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY


    B353860
  1. Detach the 2 hooks of the separate type rear seatback cover.



    B353861
  1. Remove the 2 bolts and 2 tether anchor bracket sub-assemblies.



12. REMOVE REAR SEAT HEADREST SUPPORT


    B353863
  1. Detach the 4 claws and remove the 2 rear seat headrest supports.



13. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY


    B353864
  1. Detach the 4 claws and remove the 2 rear No. 1 seat headrest support assemblies.



14. REMOVE SEPARATE TYPE REAR SEATBACK COVER WITH PAD


    B353865E01
  1. Remove the nut.

  1. Pass the rear center seat outer belt assembly through the rubber band of the separate type rear seatback cover and disconnect the floor anchor of the rear center seat outer belt assembly.
    Text in Illustration 
    *1
    Rubber Band



    B353867
  1. Remove the screw.



    B353868
  1. Detach the 2 guides and remove the upper rear seatback lock bezel of the rear center seat outer belt assembly.



    B353869
  1. Detach the 8 hooks.



    B353870
  1. Pass the floor anchor of the rear center seat outer belt assembly through the hole of the separate type rear seatback cover with pad in the direction indicated by the arrow shown in the illustration and remove the separate type rear seatback cover with pad.



15. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY


    B353874
  1. Detach the 3 guides and remove the rear center seat outer belt assembly from the rear seat shoulder belt hole cover.



    B353876
  1. Remove the nut.

  1. Detach the guide and remove the rear center seat outer belt assembly.