Home › RESTRAINTS › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET (for CrewMax LH Side)

CHILD RESTRAINT SEAT ANCHOR BRACKET (for CrewMax LH Side) > REMOVAL

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. REMOVE REAR SEAT ASSEMBLY RH


    B353823
  1. Pull the No. 1 reclining adjuster release handle RH and fold up the seat cushion.



    B353825
  1. Remove the 4 bolts and rear seat assembly RH.

    NOTICE:
    Be careful not to damage the vehicle body.



2. REMOVE REAR SEAT INNER BELT ASSEMBLY


    B353826E01
  1. Remove the bolt.

  1. Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration, and then remove the rear seat inner belt assembly.
    Text in Illustration 
    *1
    Rubber Band



3. REMOVE REAR SEAT ASSEMBLY LH


    B353822
  1. Pull the No. 1 reclining adjuster release handle LH and fold up the seat cushion.



    B353824
  1. Remove the 4 bolts and rear seat assembly LH.

    NOTICE:
    Be careful not to damage the vehicle body.



4. REMOVE REAR SEAT HEADREST ASSEMBLY


    B353848
  1. Push the 2 lock release buttons indicated by the arrows in the illustration to release the lock, and then remove the rear seat headrest assembly.



5. REMOVE REAR CENTER SEAT HEADREST ASSEMBLY


    B353849
  1. Push the lock release button indicated by the arrows in the illustration to release the lock, and then remove the rear center seat headrest assembly.



6. REMOVE TETHER ANCHOR BRACKET SUB-ASSEMBLY


    B353860
  1. Detach the 2 hooks of the separate type rear seatback cover.



    B353861
  1. Remove the 2 bolts and 2 tether anchor bracket sub-assemblies.