Home › RESTRAINTS › SEAT BELT › CHILD RESTRAINT SEAT ANCHOR BRACKET (for CrewMax LH Side)

CHILD RESTRAINT SEAT ANCHOR BRACKET (for CrewMax LH Side) > INSTALLATION

for Preparation Click here


CAUTION:
Wear protective gloves. Sharp areas on the parts may injure your hands.



1. INSTALL TETHER ANCHOR BRACKET SUB-ASSEMBLY


    B353862
  1. Install the 2 tether anchor bracket sub-assemblies with the 2 bolts.

    Torque:
    33 N*m{ 337 kgf*cm , 24 ft.*lbf }

  1. Attach the 2 hooks of the separate type rear seatback cover.



2. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY
  1. Push the lock release button to release the lock, and then install the rear center seat headrest assembly.



3. INSTALL REAR SEAT HEADREST ASSEMBLY
  1. Push the 2 lock release buttons to release the lock, and then the rear seat headrest assembly.



4. INSTALL REAR SEAT ASSEMBLY LH
  1. Install the rear seat assembly LH with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Be careful not to damage the vehicle body.



    B355145
  1. Pull the No. 1 reclining adjuster release handle LH and fold down the seat cushion.



5. INSTALL REAR SEAT INNER BELT ASSEMBLY


    B355201E01
  1. Pass the rear seat inner belt assembly through the rubber band of the separate type rear seatback cover in the direction indicated by the arrow shown in the illustration.
    Text in Illustration 
    *1
    Rubber Band
    *2
    Protruding Part

  1. Install the rear seat inner belt assembly with the bolt.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Do not allow the anchor of the rear seat inner belt assembly to overlap the protruding part.



6. INSTALL REAR SEAT ASSEMBLY RH
  1. Install the rear seat assembly RH with the 4 bolts.

    Torque:
    42 N*m{ 428 kgf*cm , 31 ft.*lbf }

    NOTICE:
    Be careful not to damage the vehicle body.



    B355146
  1. Pull the No. 1 reclining adjuster release handle RH and fold down the seat cushion.