Home › BODY ELECTRICAL › AUDIO / VISUAL › REAR DOOR SPEAKER (for CrewMax)

REAR DOOR SPEAKER (for CrewMax) > INSTALLATION

for Preparation Click here


HINT:
  1. Use the same procedure for the RH and LH sides.
  2. The procedure listed below is for the LH side.



1. INSTALL REAR NO. 2 SPEAKER ASSEMBLY
  1. Attach the 3 claws to install the rear No. 2 speaker assembly to the rear door trim board sub-assembly.



2. INSTALL REAR NO. 1 SPEAKER ASSEMBLY


  1. Connect the connector.


    B356597E04


    Text in Illustration 
    *A
    for Standard
    *B
    for 12 Speakers

  1. Install the rear No. 1 speaker assembly with the 3 screws.

    NOTICE:
    Do not touch the cone part of the speaker.

    HINT:
    Install the screws in the order shown in the illustration.



3. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY LH


    B165684E03
  1. Connect the 2 cables to the inside handle.



    B169254E01
  1. Attach the inside handle's knob to the door trim board.

  1. for 12 Speakers:

    1. Connect the connector.

  1. Attach the 10 clips to install the door trim board.

  1. Install the inside handle and door trim board to the door trim panel with the screw.

  1. Install the door trim board to the door panel with the screw.

  1. Install the clip.



4. INSTALL REAR DOOR ARMREST COVER LH


5. INSTALL REAR UPPER DOOR ARMREST BASE PANEL LH


    E278383
  1. Connect the connector.



    E278385
  1. Attach the 2 clips and 5 claws to install the rear upper door armrest base panel LH.



6. INSTALL REAR DOOR INSIDE HANDLE BEZEL PLUG LH


    B168093
  1. Attach the 4 claws to install the bezel plug.



7. INSTALL REAR DOOR FRAME GARNISH LH


    B169253
  1. Attach the 5 clips to install the rear door frame garnish.