Home › BODY ELECTRICAL › OTHER SYSTEM › POWER OUTLET SOCKET (for CrewMax Floor Shift Type)

POWER OUTLET SOCKET (for CrewMax Floor Shift Type) > INSTALLATION

for Preparation Click here



1. INSTALL REAR POWER OUTLET SOCKET COVER


    B170311
  1. Attach the 2 claws to install the rear power outlet socket cover.



2. INSTALL REAR POWER OUTLET SOCKET


    B171158
  1. Attach the claw to install the rear power outlet socket.



3. INSTALL CONSOLE BOX BEZEL
  1. Install the console box bezel with the 3 screws.



4. INSTALL REAR CONSOLE END PANEL SUB-ASSEMBLY
  1. w/ Power Outlet Socket:
    Attach the 2 wire harness clamps and connect the connector.



    B355390
  1. Attach the 7 clips to install the rear console end panel sub-assembly.