POWER OUTLET SOCKET (for CrewMax Floor Shift Type) > REMOVAL |
| 1. REMOVE REAR CONSOLE END PANEL SUB-ASSEMBLY |
![]() |
Using a moulding remover B, detach the 7 clips and remove the rear console end panel sub-assembly.
w/ Power Outlet Socket:
Detach the 2 wire harness clamps and disconnect the connector.
| 2. REMOVE CONSOLE BOX BEZEL |
![]() |
Remove the 3 screws and console box bezel.
| 3. REMOVE REAR POWER OUTLET SOCKET |
![]() |
Detach the claw and remove the rear power outlet socket.
| 4. REMOVE REAR POWER OUTLET SOCKET COVER |
![]() |
Detach the 2 claws and remove the rear power outlet socket cover.