Home › BODY › SLIDING ROOF › SLIDING ROOF SWITCH ASSEMBLY (for CrewMax)

SLIDING ROOF SWITCH ASSEMBLY (for CrewMax) > REMOVAL

for Preparation Click here



1. REMOVE SLIDE ROOF MOTOR SWITCH


    B355189E01
  1. Put protective tape around the roof console box base.
    Text in Illustration 
    *1
    Protective Tape

  1. Using a screwdriver, detach the 8 claws.

    HINT:
    Tape the screwdriver tip before use.

  1. Disconnect the connector and remove the roof console box base.



    B355190
  1. Detach the 4 claws and remove the slide roof motor switch.