Home › BODY ELECTRICAL › AUDIO / VISUAL › FLOOR SPEAKER (for CrewMax)

FLOOR SPEAKER (for CrewMax) > INSPECTION

for Preparation Click here



1. INSPECT NO. 1 BOX SPEAKER ASSEMBLY


E144969E62
  1. Measure the resistance according to the value(s) in the table below.

    Standard resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 2
    Always
    1.6 to 2.4 Ω

    If the result is not as specified, replace the No. 1 box speaker assembly.
    Text in Illustration 
    *a
    Component without harness connected
    (No. 1 Box Speaker Assembly)