NAME PLATE > REMOVAL |
| 1. REMOVE FRONT FENDER PLATE LH |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Front Fender Plate LH | 20 to 30°C (68 to 86°F) |
![]() |
Put protective tape around the front fender plate LH.
Using a heat light, heat the vehicle body and front fender plate LH.
Insert piano wire between the vehicle body and front fender plate LH.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the front fender plate LH to the vehicle body.
Remove the front fender plate LH.
| *1 | Protective Tape |
| *2 | Wooden Block |
| 2. REMOVE FRONT FENDER PLATE RH |
| 3. REMOVE DOOR NAME PLATE LH |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Door Name Plate LH | 20 to 30°C (68 to 86°F) |
![]() |
Put protective tape around the door name plate LH.
Using a heat light, heat the vehicle body and door name plate LH.
Insert piano wire between the vehicle body and door name plate LH.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the door name plate LH to the vehicle body.
Remove the door name plate LH.
| *1 | Protective Tape |
| *2 | Wooden Block |
| 4. REMOVE DOOR NAME PLATE RH |
| 5. REMOVE ROOF SIDE NO. 1 MARK LH |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Roof Side No. 1 Mark LH | 20 to 30°C (68 to 86°F) |
for Regular Cab:
![]() |
Put protective tape around the roof side No. 1 mark LH.
Using a heat light, heat the vehicle body and roof side No. 1 mark LH.
Insert piano wire between the vehicle body and roof side No. 1 mark LH.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the roof side No. 1 mark LH to the vehicle body.
Remove the roof side No. 1 mark LH.
| *1 | Protective Tape |
| *2 | Wooden Block |
for Double Cab:
![]() |
Put protective tape around the roof side No. 1 mark LH.
Using a heat light, heat the vehicle body and roof side No. 1 mark LH.
Insert piano wire between the vehicle body and roof side No. 1 mark LH.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the roof side No. 1 mark LH to the vehicle body.
Remove the roof side No. 1 mark LH.
| *1 | Protective Tape |
| *2 | Wooden Block |
for CrewMax:
![]() |
Put protective tape around the roof side No. 1 mark LH.
Using a heat light, heat the vehicle body and roof side No. 1 mark LH.
Insert piano wire between the vehicle body and roof side No. 1 mark LH.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the roof side No. 1 mark LH to the vehicle body.
Remove the roof side No. 1 mark LH.
| *1 | Protective Tape |
| *2 | Wooden Block |
| 6. REMOVE ROOF SIDE NO. 1 MARK RH |
| 7. REMOVE REAR BODY NO. 3 NAME PLATE (for 4WD) |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Body No. 3 Name Plate | 20 to 30°C (68 to 86°F) |
![]() |
Put protective tape around the rear body No. 3 name plate.
Using a heat light, heat the vehicle body and rear body No. 3 name plate.
Insert piano wire between the vehicle body and rear body No. 3 name plate.
Tie objects that can serve as handles (for example, wooden blocks) to the piano wire ends.
Pull the piano wire and scrape off the double-sided tape that holds the rear body No. 3 name plate to the vehicle body.
Remove the rear body No. 3 name plate.
| *1 | Protective Tape |
| *2 | Wooden Block |
| 8. REMOVE REAR BODY STRIPE LH |
| Item | Temperature |
| Vehicle Body | 40 to 60°C (104 to 140°F) |
| Rear Body Stripe LH | 20 to 30°C (68 to 86°F) |
Using a heat light, heat the vehicle body and rear body stripe LH.
![]() |
Pull back an edge of the rear body stripe LH and pull it parallel to the vehicle body to remove it.
| 9. REMOVE REAR BODY STRIPE RH |